Years
Warranty
USB3.2 Cloner Dock for NVMe M.2 SSD
www.sandberg.world
Quick Guide
136-72
Quick guide
2
1. USB-C 5V DC IN
2. Source:
M.2 NVMe/AHCI slot
SSD indicator
3. Target:
M.2 NVMe slot SSD indicator
4. Clone button
5. Power indicator
6. Power switch
7. Clone indicator
8. USB-C data transfer port
Product overview
1
2
3
4
5
6
7 8
Quick guide
3
Connection
USB-C
USB-C
USB-C to USB-A adapter
NOTE: SATA M.2 SSD not supported.
136-72 New Drive
Quick guide
4
Dock function
Read and write to the disks connected to the dock.
NOTE: Brand new drives must be formatted before use.
NOTE: Only the source slot supports AHCI SSD with AHCI to NVMe adapter.
USB data cable You must disconnect the dock from your PC when you perform an offline clone.
Quick guide
5
Offline clone
NOTE: Before starting clone process, please make sure that the target disk has bigger capacity than the source disk.
1.
Quick guide
6
2.
3.
2 - 3 seconds
25% 50% 75% 100%
4.
25% 50% 75% 100%
Quick guide
7
5.
25% 50% 75% 100%
Turn off the power.
Remove the drives.
Warranty
Helpdesk
There is a five-year warranty on your Sandberg product.
Please read the warranty terms and register your new Sandberg product at www.sandberg.world/warranty
For information on handling electronic waste, see www.sandberg.world/weee
http://helpdesk.sandberg.world
8
Made in China
Sandberg A/S
Bregneroedvej 133D,
3460 Birkeroed, Denmark
www.sandberg.world
[email protected]
Item no. 136-72USB3.2 Cloner Dock for NVMe M.2 SSD
Years
Warranty