Sandberg USB 2.0 Hub AluGear (4 porte) (135-53)

USB 2.0 Hub AluGear (4 porte) Sandberg

kr. 249.00

Hetta vøra er ikki longur á marknaðinum
Vørunr.: 135-53
EAN: 5705730135538

Sandberg USB 2.0 Hub enables you to attach more USB peripherals to your computer. The hub is compatible with both USB 1.1 and USB 2.0 ports. When connected to a USB 2.0 port, you can achieve high USB 2.0 data transfer rates right up to 480 Mbit/s! The hub features built-in overload protection of your computer’s USB ports and the hub’s ports from peripherals which overload them. Connect your hub using the cable supplied, and Windows® will install the necessary software automatically. It’s as easy as that!

Interface standard: USB 2.0
Supports USB 2.0 Hi-Speed (480 Mbit/s),
Full-Speed (12 Mbit/s) and Low-Speed
(1.5 Mbit/s) transfer rate
USB connectors: 4 USB A-female and 1 B-female
Supplying USB ports with up to 500mA
(with power adapter)
Built-in overload protection
Chains up to 127 USB devices
Power ON LED light indicator
Protective aluminium case

Skipanarkrøv:
1 available USB port*
Pentium PC or compatible
* USB 2.0 port is required for benefiting
from the USB 2.0 speed.

Samsvarandi við:

Windows XP
Windows 2000
Windows ME
Windows 98SE
Windows 98

Pakkingarupplýsingar

Sandberg USB 2.0 Hub
230V Power supply
USB 2.0 connection
Cable 1.8 metres
User guide in English,
Danish, Norwegian,
Swedish and Finnish
Warranty card

Info

Mát

	Vøra	Pakki
Hædd	1.8 cm	24.2 cm
Breidd	9 cm	13.3 cm
Dýpd	5 cm	5.7 cm
Vekt	30 g	343 g

135-53 USB 2.0 Hub AluGear (4 porte)

Contact the Sandberg Helpdesk

If you cannot find answers to your questions about your product, please contact the Sandberg Helpdesk and get a quick response on weekdays:

Contact the Sandberg Helpdesk

Handbók

Product Manual (English, Dansk, Norsk, Svenska, Suomi)

Ofta settir spurningar

When I connect the hub to my computer, it asks for a driver. Where can I find this?

The driver for the hub is a standard Windows driver, so it is installed automatically. If you have connected another USB device to the hub, it is the drivers for this device that are missing. NB: When moving a USB device from a USB port on the computer to one on the hub, the driver may need to be reinstalled.