USB 3.2 Cloner and Dock for M2 + NVMe + SATA Sandberg
USB 3.2 Cloner and Dock for M2 + NVMe + SATA
Prijs 68,99 €
Adviesprijs excl. BTW:   57,02 €

Artikelnr.: 136-49
EAN: 5705730136498

Sandberg USB 3.2 Cloner & Dock for M2 + NVMe + SATA geeft u een eenvoudige externe aansluiting voor traditionele, SSD en NVMe M.2 SSD 3,5"/2,5" SATA harde schijven van verschillende groottes. Plaats uw schijf in deze handige kleine dock, zodat u geen gebruik hoeft te maken van kastjes en schroeven. De dock wordt eenvoudig aangesloten op uw pc via een USB-A- of USB-C-poort en werkt direct. Met een USB 3.2-interface krijgt u een snelle overdracht tot 10 Gbps. U kunt ook de volledige inhoud van een harde schijf klonen op een andere harde schijf zonder pc-aansluiting. De kloonfunctie werkt in beide richtingen.

Clone and dock in one
Instant hard disk cloning
2 hard disks to a single USB port


New Tek Reviews:

»After playing around with this Sandberg’s USB 3.2 Cloner and Dock for M2 + NVMe enclosure for a couple of weeks and installing a three different drives on three different operating systems, I can say it passes my inspection and is a very well made device. We were even able to image a loaded drive to another system using third-party software (Acronis True Image) and make that system bootable. That is to say, the USB 3.2 Cloner and Dock for M2 + NVMe enclosure does everything you’d expect it to, with no disappointments. It also comes with 5 years warranty.«

Practical Electronics:

»I've tried it and certainly love it. I just wish I hadn't previously wasted my money on a multi-bay HDD dock that looks good but has corrupted some of my HDDs, and also on two-bay HDD docks, which are far less use than the much neater Sandberg tool.«

indie-eye.it:

»We tested the product directly and were favorably impressed. The ease of use and assembly of hard drives is equal to the effectiveness of the cloning process.«

Gameelite:

»Sandberg's new docking station can not only copy data but also clone SATA and M.2 disks. Easy to use. Suitable for both cloning and backup. Fairly low price.«

The Fox Report:

»I've tried it and certainly love it. «

Newtekreviews.com:

»It passes my inspection and is a very well made device. The item does everything you’d expect it to, with no disappointments. It also comes with 5 years warranty.«

indie-eye.it:

»We tested the product directly and were favorably impressed. The ease of use and assembly of hard drives is equal to the effectiveness of the cloning process.«

Datormagazin:

»The solution is extremely easy to use and works perfectly.«

  • Support offline clone:
  • (1)3.5"/2.5" SATA to NVMe M.2
  • (2)NVMe M.2 to 3.5"/2.5" SATA
  • USB3.2 Gen2 superspeed up to 10Gbps (backward compatible with older standards)
  • Transfer speed max: SATA 6 Gpbs, M.2/NVMe 10 Gpbs
  • SSD types supported: M.2, NVMe, M Key
  • SSD sizes supported: 2230 / 2240 / 2260 / 2280
  • Chipset: JMS581D
  • LED indicator for power and data access
  • Offline clone, two-way clone (NVMe to SATA, SATA to NVMe)
  • Max. capacity supported 3.5" HDD: 24TB
  • Max. capacity supported 2.5" HDD: 8TB
  • Max. capacity supported SSD: 4TB
  • Max. capacity supported M.2: 4TB

Compatibel met:

  • Windows 11
  • Windows 10
  • Windows 8
  • Windows 7
  • MacOS
  • Linux

Verpakkingsinformatie

  • 1 Sandberg USB 3.2 Cloner & Dock for M2 + NVMe + SATA
  • 1 Power Supply output DC 12V/3A, input 230V AC, EU connector
  • 1 USB-C to USB-A/C connecting cable, 80 cm
  • 1 Quick guide
Info

Afmetingen

Product Verpakking
Hoogte 10,84 cm 13,50 cm
Breedte 2,41 cm 16,90 cm
Diepte 4,43 cm 5,50 cm
Gewicht 100 g 120 g

Neem contact op met de Sandberg-helpdesk

Als u met betrekking tot uw product op uw vragen geen antwoorden kunt vinden, kunt u contact opnemen met de Sandberg-helpdesk voor een snel antwoord op werkdagen:

Handleiding

FAQ (Veelgestelde vragen)

Wanneer ik SATA probeer te klonen naar NVMe of omgekeerd door de kloonknop 3 seconden ingedrukt te houden, beginnen alle 4 de percentageleds hard te knipperen, maar daarna lijkt het alsof er niets gebeurt. Niets wijst erop dat het klonen is begonnen.

Houd de kloonknop 3-5 seconden ingedrukt en laat hem los zodra alle leds branden (25%, 50%, 75%, 100%). Druk nogmaals snel op de knop en het klonen begint. Zodra alle leds weer zijn gedoofd, is het klonen voltooid. Vergeet niet de kloner uit te schakelen voordat u de HDD/SSD loskoppelt.

Video's
Uitgeschakeld zolang u geen toestemming geeft voor Functionele cookies.

USB 3.2 Cloner and Dock for M2 + NVMe + SATA is genoemd in ons perscentrum: