USB 3.0 Boost PCI Express Sandberg
USB 3.0 Boost PCI Express
119,00 zł

Ten produkt został wycofany
Nr pozycji: 130-28
EAN: 5705730130281

Kontroler Sandberg USB 3.0 Boost PCI-E umożliwia wyposażenie komputera w standard USB 3.0 o wysokiej prędkości. Wystarczy włożyć kartę do wolnego złącza PCI-E wewnątrz komputera, następnie podłączyć urządzenia USB 3.0 do wejścia USB 3.0 karty.

Data rate up to 5 Gbit/sec
Instant USB 3.0 upgrade

Tacky.se says:

»The installation procedure was very simple and easy.«

Komputer for Alle says:

»Fast data transfer, simple installation, extra power connection, attractive price.«

HighTech Forum says:

»Installation was very easy.«

TechCentral says:

»The difference really is astonishing.«

  • Compliant with PCI Express Base Specification Revision 2.0
  • Single-lane (x1) PCI Express throughput rates up to 5 Gbps
  • Compliant with Universal Serial Bus 3.0 specification Revision 1.0
  • Supports simultaneous operation of multiple USB 3.0, USB 2.0 and USB 1.1 devices
  • Supports 2 downstream ports for all speeds
  • Built-in 4-pin power connector for receiving extra power supply from system
  • Compliant with Intel’s eXtensible Host Controller Interface (xHCI) Specification 0.96

Zgodność z:

  • Windows 11
  • Windows 10
  • Windows 8
  • Windows 7
  • Windows Vista
  • Windows XP

Informacje o opakowaniu

  • 1 Sandberg USB 3.0 Boost PCI-E
  • 1 Driver CD
  • 1 4-pin power cabl
  • 1 User guide
Info

Wymiary

Produkt Opakowanie
Wysokość 19,00 cm
Szerokość 16,80 cm
Głębokość 3,50 cm
Masa 700 g 250 g
130-28 USB 3.0 Boost PCI Express

Skontaktuj się z Działem pomocy firmy Sandberg

Jeśli nie możesz znaleźć odpowiedzi na swoje pytania dotyczące produktów, skontaktuj się z Działem pomocy firmy Sandberg i otrzymaj szybką odpowiedź w ciągu dni roboczych:

Podręcznik

FAQ

Why does the card sometimes lose its connection when I connect a device to it?

Try connecting it to the power cable supplied as described in the manual. If this does not help, Windows' power saving function on the PCI-E port may have been enabled. If this is the case, it must be disabled.

I inserted the CD into my CD drive and entered the driver path from the manual, but I get an error message.

Unfortunately, we had a production where the driver path on the CD and manual do not match. You should use this path: D:\RENESAS-USB3-Host-Driver-30160-setup.exe

Dlaczego sterownik dla Windows 10 nie jest dostępny do pobrania?

Karata jest instalowana automatycznie w Windows 10 bez ręcznej instalacji sterownika.

W centrum prasowym są informacje o USB 3.0 Boost PCI Express: